
Repair from inside the pipe
See if your sewer can be fixed without a shovel. Get a Free Estimate
Homeowners searching for sewer repair with no digging usually have two fears: what it will cost to tear up the yard, and what they will find when they do. No-dig repair addresses both. Working through an existing cleanout or a single small access point, we can install a sectional liner over a cracked joint, seal root entry points, or line a full run of deteriorating pipe from the inside. The surface above the line, whether it is lawn, landscaping, a driveway, or a sidewalk, stays as it is.
The catch is that no-dig methods need a pipe that still holds its shape. A collapse or a severe belly has to be corrected with a targeted excavation before anything can be installed. That is usually a small pit at one spot, not a trench. In Kansas City, KS, where many laterals are old clay tile under mature trees, the most common no-dig job is sealing root-damaged joints so the roots stop coming back every spring. We camera the line first and tell you plainly which parts can be done without digging.

These are the sewer conditions where a repair from inside the pipe is usually the right answer.
A sectional liner bonds over the damaged area and restores a smooth, sealed wall without opening the ground.
Roots enter at joints. Sealing those joints from inside removes the entry point instead of trimming the roots back every year.
Mature trees and established beds are expensive or impossible to replace. No-dig repair leaves them in place.
Avoiding a cut through concrete or asphalt often saves more than the repair itself costs.
| Service | Estimated Cost | Average |
|---|---|---|
| Single sectional point repair | $2,000–$4,500 | $3,250 |
| Multiple joint seals or short liner | $3,500–$7,500 | $5,500 |
| Full-length no-dig lining | $6,000–$14,000 | $10,000 |
Planning ranges only. Number of repair points, pipe diameter, cleaning and prep, and access affect the final price. Written estimate after the camera inspection.

A no-dig product installed over a collapse fails. If a spot needs a pit, we tell you up front and keep it as small as possible.
If one joint is the problem, we repair one joint. A full-length liner is recommended only when the whole pipe is deteriorating.
You see the before and after on camera, so you know exactly what was sealed and that the line is flowing.
Before you accept a bid that tears up your yard, find out how much of the repair can be done from inside the pipe.
Free — no obligations

We locate every defect, measure its position, and confirm the pipe holds its shape well enough for an internal repair.
Hydro cleaning and root cutting prepare the pipe wall so the repair bonds properly.
The sectional liner or seal is placed precisely at the defect using the camera and measured footage.
The material cures against the old pipe, forming a new sealed wall over the damaged area.
A final camera pass and flow test confirm the repair before we consider the job done.